Genie garage door opener offer safety and security. They have the technology change the door code with each user and automatically stops if the door contacts an object. This is a comfort for users to know their code cannot be captured by anyone, leaving the property unprotected. Even with these conveniences, there will be times when you need to reprogram the device. Reprogramming the remote control is like restarting a computer, which you are clearing out which blocks the signal. How todo it? Open the keyboard cover and open a halfway position.
Now simultaneously press and hold number 8 and PROG buttons and open the cover completely. If done correctly, you will see the indicator light blink once now you can close the cover and begin the genie garage door opener programming. After opening, press numbers 3, 5 and 7 completely cover the remote. Press the PROG button and the indicator light flashes twice. Close the cover again and press the Learn Code button and at this point you will see the LED flash open the cover when you see flash.
Enter the PIN number (this can be up to 8 numbers) and press the Send button 4 times in succession or until you see the garage doors open. When this happens, you will have your Genie Opener new to the garage. For safety reasons, remain in the sight of the garage door opening and closing to ensure that no objects or children are near the door while in operation. Enter a code if you have more than one garage door by opening the cover, enter the PIN code and press PROG three times. Enter the number of doors you program and press PROG. Close the cover programming is complete.